CUP WIRE BRUSH WITH NUT
STOCK NO. | SIZE | THREAD | MAX.RPM | QTY./CARTON |
77581 | 75mm | M10x1.5 | 12.500 | 60 |
77501 | 75mm | M14x2 | 12.500 | 60 |
77503 | 100mm | M14x2 | 8.500 | 36 |
77504 | 125mm | M14x2 | 6.500 | 24 |
CUT-OFF SAW
STOCK NO. | SIZE | QTY./CARTON |
79538 | 2500W | 6 |
DEMOLITION HAMMER
•Ultra-fine grinding cylinder supply strong impact energy •360 degree portable side handle •High strength modulus gear improve lifetime •1700W copper wire motor with dustproof design •Ergonomic handle soft grip •Sturdy durable huge impact power
•GS approved •Input power: 1700W •Voltage: 230V •Frequency: 50Hz •Impact rate: 1850bmp •Impact force: 60J •HEX chuck system •Net weight: 16kgs •Accessories contain: •1pc point chisel: 3x410mm •1pc flat chisel: 3x410mm •1 pair Carbon brush •1 bottle lubricating oil •1pc wrench •2pcs hex keys •Packing: BMC boxSTOCK NO. | SIZE | QTY./CARTON |
79517 | 1700w | 1 |
DEPRESSED CENTRE CUTTINGOFF WHEEL (TYPE 42)
STOCK NO. | SIZE | MAX.RPM | QTY./CARTON |
76141 | 100×3.0x16mm 4"x1/8"x5/8" | 15300 | 200 |
76142 | 115×3.0x22.2mm 4-1/2"x1/8"x7/8" | 13300 | 200 |
76143 | 125×3.0x22.2mm 5"x1/8"x7/8" | 12250 | 200 |
76145 | 180×3.0x22.2mm 7"x1/8"x7/8" | 8500 | 100 |
76147 | 230×3.0x22.2mm 9"x1/8"x7/8" | 6650 | 50 |
DEPRESSED CENTRE CUTTINGOFF WHEEL (TYPE 42)
STOCK NO. | SIZE | MAX.RPM | QTY./CARTON |
76181 | 100×3.0x16mm 4″x1/8″x5/8″ | 15300 | 200 |
76182 | 115×3.0x22.2mm 4-1/2″x1/8″x7/8″ | 13300 | 200 |
76183 | 125×3.0x22.2mm 5″x1/8″x7/8″ | 12250 | 200 |
76185 | 180×3.0x22.2mm 7″x1/8″x7/8″ | 8500 | 100 |
76187 | 230×3.0x22.2mm 9″x1/8″x7/8″ | 6650 | 50 |
DEPRESSED CENTRE GRINDING WHEEL (TYPE 27)
STOCK NO. | SIZE | MAX.RPM | QTY./CARTON |
76301 | 100×6.0x16mm 4"x1/4"x5/8" | 15300 | 100 |
76302 | 115×6.0x22mm 4-1/2"x1/4"x7/8" | 13300 | 100 |
76303 | 125×6.0x22.2mm 5"x1/4"x7/8" | 12250 | 100 |
76305 | 180×6.0x22.2mm 7"x1/4"x7/8" | 8500 | 50 |
76307 | 230×6.0x22.2mm 9"x1/4"x7/8" | 6650 | 30 |
DEPRESSED CENTRE GRINDING WHEEL (TYPE 27)
STOCK NO. | SIZE | MAX.RPM | QTY./CARTON |
76321 | 100×6.0x16 4″x1/4″x5/8″ | 15300 | 200 |
76322 | 115×6.0x22.2 4-1/2″x1/4″x7/8″ | 13300 | 200 |
76323 | 125×6.0x22.2 5″x1/4″x7/8″ | 12250 | 200 |
76325 | 180×6.0x22.2 7″x1/4″x7/8″ | 8500 | 100 |
76327 | 230×6.0x22.2 9″x1/4″x7/8″ | 6650 | 30 |
DIAMOND CUTTING BLADE
STOCK NO. | SIZE | MAX.RPM | QTY./CARTON |
76700 | 100×16.0mm 4"x5/8" | 15.300 | 100 |
76702 | 115×22.2mm 4-1/2"x7/8" | 13.300 | 100 |
76703 | 125×22.2mm 5"x7/8" | 12.250 | 100 |
76705 | 180×22.2mm 7"x7/8" | 8.500 | 40 |
76707 | 230×22.2mm 9”x7/8” | 6.650 | 20 |
DIAMOND CUTTING BLADE
STOCK NO. | SIZE | MAX.RPM | QTY./CARTON |
76720 | 100×16.0mm 4"x5/8" | 15.300 | 100 |
76722 | 115×22.2mm 4-1/2"x7/8" | 13.300 | 100 |
76723 | 125×22.2mm 5"x7/8" | 12.250 | 100 |
76725 | 180×22.2mm 7"x7/8" | 8.500 | 40 |
76727 | 230×22.2mm 9"x7/8" | 6.650 | 20 |
DIAMOND CUTTING BLADE
STOCK NO. | SIZE | MAX.RPM | QTY./CARTON |
76740 | 100×16.0mm 4"x5/8" | 15.300 | 100 |
76742 | 115×22.2mm 4-1/2"x7/8" | 13.300 | 100 |
76743 | 125×22.2mm 5"x7/8" | 12.250 | 100 |
76745 | 180×22.2mm 7"x7/8" | 8.500 | 40 |
76747 | 230×22.2mm 9"x7/8" | 6.650 | 20 |
DRILL PRESS(1500W)
• Input power: 1500W • Voltage: 230V • Frequency: 50Hz • No load speed: 150-2450RPM • 12 spindle speeds • Spindle travel: 120mm • Spindle Taper: MT4 • Chuck capacity:32mm (Accessories contain:1pc chuck 20mm) • Table size: 420x480mm • Table tilt: 45° left and right • Base size: 575x425mm • Max. distance from spindle end to surface of table: 700mm • Net weight:125Kgs • Machine height:1710mm • Packing: carton box
STOCK NO. | SIZE |
79656 | 1500W |
DRILL PRESS(350W, GS approved)
• Input power: 350W • Voltage: 230V • Frequency: 50Hz • No load speed: 620-2620RPM • 5 spindle speeds • Spindle travel: 50mm • Spindle taper: B16 • With chuck guard • With micro-switch • Chuck capacity: 13mm • Electromagnetic switch • Table size: 160x160mm • Base size: 290x190mm • Max. distance from spindle end to surface of table: 220mm • Gross weight: 16kgs • Machine height: 580mm • GS approved
STOCK NO. | SIZE |
79651 | 350W |